Skip to content
Quantum.world

The Signal

Preprint reports 99.63% fidelity for common-clock CZ gates

A preprint reports an estimated average fidelity of 99.63% for a 120-nanosecond controlled-Z gate driven by common-clock pulse sequences. The experiment used an arbitrary waveform generator, not a single-flux-quantum control system.

Preprint reports 99.63% fidelity for common-clock CZ gates

A common-clock pulse scheme produced a 120-nanosecond controlled-Z gate with an estimated average gate fidelity of 99.63% in a superconducting-qubit experiment, according to a preprint posted on arXiv on Nov. 17. The work demonstrates the control method using an arbitrary waveform generator; it does not demonstrate a control system built from single-flux-quantum circuits.

Encoding pulses on one clock

The paper describes a way to control single- and two-qubit gates with bipolar pulse sequences timed to a shared clock, rather than separate microwave trigger frequencies for different qubits. Its authors include Chenyin Sun, Yu Xu and Jian-Wei Pan.

The sequence is generated from a guiding waveform. The method turns that waveform into a series of positive, negative or zero pulse slots: for lower-frequency signals, it tracks the waveform’s accumulated area, while for signals near the qubit transition frequency, it uses thresholds to determine the pulses.

For the experiment, the team used an arbitrary waveform generator running at a fixed sampling rate of 25 gigasamples per second to generate the pulse sequences. Filters were placed between the generator and the quantum device to remove unwanted frequency components. The experimental setup used superconducting transmon qubits and a coupler.

Gate results

The researchers measured a 40-nanosecond single-qubit rotation with an average gate fidelity of 99.94%, estimated using cross-entropy benchmarking. The paper gives an uncertainty of 0.003 percentage points for that estimate.

For a 120-nanosecond controlled-Z gate, the paper reports an estimated average gate fidelity of 99.63% with a standard error of 0.02 percentage points. That estimate came from cross-entropy benchmarking and an independent, small-error approximation; the analysis subtracts the separately characterized Pauli errors of the single-qubit gates used in the measurement.

They also report a controlled-Z control error of 2 × 10⁻⁴. In the benchmark cycles, conventional control electronics generated the single-qubit gates, while the arbitrary waveform generator supplied the controlled-Z pulse sequences.

Simulation and next steps

The paper reports simulated fidelities of 99.99% for 40-nanosecond single-qubit rotations and 99.9% for 100-nanosecond controlled-Z gates. These are simulation results, distinct from the experimentally measured gate figures.

The authors say integrating SFQ waveform generators with qubits at 20 millikelvin is planned future work. In that proposed system, encoded pulse sequences would be stored in superconducting digital circuitry and selected with digital commands; a common clock line would time their playback.

Sources

  1. Demonstration of a Qubit Control Scheme Compatible with Superconducting Digital Signals
  2. arXiv (full text)

Related stories

Explore

More articles